Overview Thank you for purchasing this portable digital video camera, this camera features video recording at 4K. With resolution of 3840*2160, it adopted 1/3-inch image sensor,the video file storage usage is small while it has high image quality! You can connect your camera via Wi-Fi using your smart Phone remotely, to view the camera live screen and use your phone to record or shooting.
Table Of Contents Getting to Know Your Camera ................................................ 1 Standard Accessories ................................................... 1 Charging the Battery ..................................................... 1 Component Introduction ............................................... 3 Getting Started....................................................................... 7 Inserting an SD Card .................................................... 7 Loading Battery .........
Getting to Know Your Camera Standard Accessories 4K Ultra HD Camera Battery Charger USB Cable Infrared remote control HDMI Cable User Manual DV Pouch The above are all accessories, if there is any missing, please contact the seller for replacement.
Charging with USB Cable (Direct Charge) 1.Please Connect the USB Cable to the charging adapter when camera is running low. 2.Connect the other side to the Camera’s USB charging interface. 3.The indicator light will be red when charging; The indicator light will turn green when the charging is completed. Note: 1.When using the charger, please install the battery in the charger slot correctly. 2.For direct charge, please use the 5V/2A-2.5A charging adapter for charging. 3.
Component Introduction A ② ③ ⑭④ ⑤ ① ⑦ ⑥ ⑧ ⑨ ⑩ ⑪ ⑫ ⑰ ⑬⑮ ⑯ ⑱ ⑲ For the function description of the related parts in the above figure, please refer to the following table. No. Name ① IPS Touch Panel ② Hot shoe interface ③ Horn ④ DISP Button Function description Screen preview and video/photo playback. Mount hot shoe products. Plays back sounds. Press to switch screen display Mode.
In video/Photo Mode, pull left/ right to zoom in/out; In Playback Mode, pull to switch photos/videos; In Menu, pull to menu selection. In Video Playback, pull to adjust the volume. ⑤ T/W Zoom Button ⑥ Photo Button ⑦ Power indicator ⑧ Power Button ⑨ State Light ⑩ Mode Button Press to enter the mode menu while in photo / video / playback mode. ⑪ Video Button 1.Recording/stop video. 2.Stop playback when the video is Playing.
the photo / recording mode, press to turn on / off the IR Light.. ⑮ Down Button/“Delete” Shortcut When entering the menu, press and move the cursor down;Press to delete recent videos or photos. ⑯ Right Button/Increased exposure When entering the menu, press and move the cursor to the right;In photo / video mode, press exposure to increase the exposure value.
For the function description of the related parts in the above figure, please refer to the following table. No. Name ① Lens ② Infrared remote-control receiver ③ IR Light Function description Framing Receiving remote command Lighting assist C ② ① ③ For the function description of the related parts in the above figure, please refer to the following table. No. ② Name 1/4 Tripod Socket Battery Compartment ③ SD slot ① Function description Tripod installation. Load NP-40B Battery.
Getting Started Inserting an SD Card 1.Open the Battery cover. 2.Insert the memory card in the direction shown until you hear“Clicks”. 3.Close the Battery cover. ※Open the Battery cover and press the memory card. Note: 1. It is strongly recommended to use U3, which supports up to 256G high-speed memory card. 2.Do not forcefully remove the SD card while working, otherwise it may cause loss of files or machine damage.
Loading Battery 1.Open the Battery cover. 2.inserts a lithium battery. 3.Close the battery cover. Note: 1.Do not violently open the battery cover and remove the battery. 2.The battery needs to be loaded into the battery compartment in a correct direction.
Recording Mode ① ⑤ ② ⑥ ③ ⑦ ④ ⑧ ① Recording mode ⑤ Memory Card ② Resolution ⑥ Menu ③ Remaining video recording time ⑦ Zoom ④ Battery Status ⑧ Pause recording 1.Press the “Power Button” or open the screen to turn on the camera, enter the video mode. 2.Set the option of the function you need by the option setting menu. 3.Press the Rec button to start shooting. 4.Press the Rec button again to stop shooting. 5.Press the photo button to pause when recording and press it again to continue.
Video setting menu Enter the menu by button or touch, you can set the resolution, white balance, exposure and other function parameters to get better video results 1.Enter the video mode . 2.Press the “Menu Button” or touch the icon on the screen to enter the menu. 3.Touch the Name on the screen to enter the menu.
Resolution 4K30fps/2K30fps/FHD30fps/HD30fps/ VGA30fps/FHD60fps/HD120fps AWB Auto/Daylight/Cloudy/Fluorescent/ Tungsten Color Standard/Brown/Black、White/ Realistic Color Exposure +3~-3 Date Stamp On/Off Metering Multi/Center/Spor Note:Use FHD60FPS and HD120FPS non-zoom. 4.By switching the “T/W Zoom Button” “Up Button”、 “Down Button”or swipe screen to select the setting option freely. 5.
This feature allows you to compress a few minutes, hours or even days of video playback in a short period of time 1.Enter the video mode. 2.Press the “Menu Button” or touch the screen to enter the menu. icon on the 3.Touch to enter the option menu:off/1s/3s/5s. 4.By touching or pressing the “Photo Button” to select the option,touch to return to the main menu, touch to return to the standby main interface. Note:1s.3s.5s is the interval time of each frame.
⑤ ③ ② ① ⑥ ④ ⑦ ① Photo mode ⑤ Memory Card ② Resolution ⑥ Menu ③ Remaining number of shoots ⑦ Zoom ④ Battery Status 1.Press the “Photo Button” or open the screen to turn on the camera, Press "Mode Button" to enter the mode menu, and Touch to enter the main interface of the photo mode. 2.Set the option of the function you need by the option setting menu. 3.Press the "Photo Button”, take a picture .
Photo setting menu Enter the menu by button or touch. You can set the resolution, white balance, exposure and other function parameters to get better photo results in the menu. 1.Enter the Photo mode . 2.Press the “Menu Button” or touch the to enter the menu. 3.Touch the on the screen on the screen to enter the set menu.
Name Resolution Function Description 30M/24M/20M/16M/12M/10M/7MHD 5M/2MHD/VGA AWB Auto/Daylight/Cloudy/Fluorescent/ Tungsten Color Standard/Brown/Black、White/ Realistic Color Exposure +3~-3 Metering Multi/Center/Spot Sharpness Soft/Normal/Sharp ISO Auto/100/200/400/800/1600 4.By switching the “T/W Zoom Button” 、“Up Button”、 “Down Button”or swipe screen to select the setting option freely. 5.
Function By using various features in this option menu allows you to take pictures easier and faster Name Function Description Capture Mode By selecting: Off, 2s, 5s, 10s to selfie. Anti-Shake Turn on this function can effectively reduce the picture jitter cause by strong vibration.
When this function is turned on, the face will be in priority focus when the camera detects a human face Face Detect Burst Mode Take three consecutive photos Date Stamp Turn on this function to add a date watermark in the lower right corner of the photo 1.Enter the photo mode,press “Menu button” or touch to enter the main menu. 2.Touch to enter the option menu. 3.By switching the “T/W zoom Button” 、 “Up Button” 、 “Down Button”or swipe screen to select the setting option freely. 4.
Set Mode Through this setting menu, you can customize the function parameters such as language, date and frequency. Name Function Description Language 13 Languages. Sound Turn On/Off the camera button sound. Far Mode On/Off Set Date Customize the date and time of the photo or video.
Frequency Normally, 60Hz is suitable for US or other countries. While 50 Hz is suitable for European countries and Japan and so on. Auto Off Off/3mins/5mins/10mins. Format Yes/No. Default Yes/No. 1.Press the “Power Button” or open the screen to turn on the camera, Press "Mode Button" to enter the mode menu, and Touch to enter the main interface of the SET mode. 2.By switching the “T/W Zoom Button” 、“Up Button”、 “Down Button”or swipe screen to select the setting option freely. 3.
PlayBack This function allows you to play recorded video or photo in the camera 20
Video 1.Press the "Menu Button" or touch to enter the menu interface in the photo or recording mode. 2.Touch to enter the playback function menu. 3.Touch the video option to enter the 12 palace video playback interface 4.Select any one of the video thumbnail to enter the preview screen. 5.Switch to the previous or next by touching or . 6.By Touching button or “Photo Button” to start playback. 7.
3.Touch the video option to enter the 12 palace photo playback interface 4.Select any one of the Photo thumbnail to Browse photos. 5.Switch to the previous or next by touching or . 6.By touching or pressing the “Menu Button”, you can delete the current file, delete all files, lock or unlock current file or all files. Slide Show 1.Press the "Menu Button" or touch to enter the menu interface in the photo or recording mode. 2.Touch the to enter the Slide Show interface 3.
Connecting to TV When connect the HDMI to your camera’s HDMI output and your TV, the image on your screen can also be displayed on your TV screen. 1.Press the power button or open the screen to turn on the camera and enter the standby state. 2.Take out the HDM cable and connect the camera with the HDMI connector of the TV. 3.Turn the TV to the HDMI channel, the preview screen will appears on the TV.
Connecting to the Computer This function allows you to use your camera as a MSDC disk or PC Camera MSDC Mode 1.Power on the camera and enter the standby mode. 2.Connect the camera and computer with the cable. 3.The screen will display two options: “MDSC”and “PC Camera”. 4.Select the “MSDC ” by“T/W Zoom Button” . 5.Press “Photo Button” to confirm. PC Camera Mode 1.Power on the camera and enter the standby mode. 2.Connect the camera and computer with the cable. 3.
4.Select the “PC Camera ”by “T/W Zoom Button” . 5.Press “Photo Button” to confirm. APP Using APP Downloading For Android: Search “D Video” in Google Play and download, For IOS: Search “D Video” in App store and download. Or scan the QR Code to download the APP. APP Connecting 1.Press the power button or open the screen to turn on the camera, Press "Mode Button" to enter the mode menu, and Touch to enter the main interface of the WiFi mode. 2.
3.Enter the APP, touch“ Camera”. Note:The Wi-Fi function is a point-to-point wireless connection with a limited distance. The maximum distance is about 10 meters. Please use this function within the effective distance.
Setting Back Lens Preview Battery Status Resolution Record mode Resolution Setting Playback Photo Mode Record/Photo Button App Functions You can remote control the camera to record, photo taking, playback and parameter setting on the APP APP Video Mode 1.Touch the on the App user interface to enter the Video mode. 2.Touch the icon , “REC” will be displayed at the top Right of the interface and flashes on the live preview., Start recording.
3.Touch the icon again, Stop recording. APP Photo Mode 1.Touch the on the App user interface to enter the Photo mode. 2.Press the icon in live preview mode,the app will sound "click". 3.Finished. APP Setting This setting function allows you to customize the parameters of the camera, such as the resolution, audio recording, and date Press the menu.
camera Firmware Version Camera Version APP Play Back Through this function, the recorded video and photos can be played online on the APP and downloaded to the phone. A.Photo 1.Press the on the App user interface to enter the Play Back mode. 2.In the main interface of the playback, select “Photo” to enter the thumbnail preview interface. 3.Select anyone of the document thumbnail to play. 4.Touch want to in the upper right corner to select any file you delete or download to the local album. B.
want to delete or download to the local album. C. Album 1.Press on the main interface to enter the local album. 2.In the main interface of the playback, select “Video” or”Photo” to enter the thumbnail preview interface. 3.Select any one of the document thumbnail to play , delete or share it to the social media by touching. Technical Parameters Sensor Aperture Lens 13.0MP CMOS F:2.2 F=4.
Focus Range Lens Type Zoom 1m~infinity Digital zoom lens 30X External Storage Support SD Card(U3),Maximum 256GB Screen 3.
Working Temperature 0~40 °C Troubleshooting Trouble Possible reason Solution Cannot power on Battery is not inserted correctly/dead Insert battery correctly/Charge Unclear Focus Out of focus range / lens dirty Shooting in focus able range/Clean the lens Unable to use memory card/unable to record Card damage / SD card does not meet requirement Replace the SD card / Format the SD Card / Use the U1 Card Fail to use it as a PC Cam USB Cable is loose / Computer system version is not compatible Re
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.