User's Manual

·Charging
When you use keyboard in process,the status tinkle which advise you the battery is shortage.You should charging.
（1）、Separate put the USB terminal cable plug into the PC and keyboard.As follow picture.
（2）、When you charging,the
red light on.When the light off,the battery is full enough.(theoretical charging
time 2hours)
·Storage
(1)、When you don’t want to use the keyboard and carry,please close the back stand.Then put iPad cover the
keyboard,the screen of iPad will turn off automatically.
（2）、When you don’t want to use the keyboard and carry.Don’t forget turn off the power switch of keyboard.In
order to extend your battery life span.
（3）、If you want to store the keyboard long time.Don’t forget charging the keyboard around 1hour till the battery
half which can extend your battery life span.
·Troubleshooting
Keyboard and IPAD cannot establish connections
①、please check your iPad bluetooth device is already open and went in search of state.
②、 Press and release the”connect” button of keyboard ,check the Status indicator flash or not.
③、keyboard and iPad connected within 10 meters from working range.
④、Bluetooth devices of iPad changing or not, if it is,need to match again.
⑤、Your iPad bluetooth device is also connected to the other bluetooth terminal and confirm Ipad bluetooth device
speed.
⑥、Checking your battery, if there is electricity shortage, please charge.
This equipment already through the class B digital equipment testing
The FCC, the federal communications commission interference statements:
This equipment already through the class B digital equipment testing
The FCC regulations in accordance with article 15 for the regulations set is to give the
installation process may cause harm on the environment to provide the necessary protection.
This equipment in use process will produce radio radiation. If do not follow the instructions