User's Manual

*Note: Android 5.0 or iOS 9.0 above is required.
The camera supports the connection of the wireless router or Sync Module.
Sync Module is central hub of your camera system. This connects to your
Wi-Fi network and to your camera(s).
For full App instructions please visit the official website.
Instructions for
Android: www.vpai360.com/en/apps/home/android/; Instructions for iOS:
www.vpai360.com/en/apps/home/apple/.
2.3 IP Camera Firmware Update
When you connect your camera to your phone through the VPai Home
App, it will automatically detect the latest firmware and prompt you when a
new firmware upgrade is available. You can also check the firmware update
manually in Device Settings page of VPai Home App. If you accept to install
the firmware upgrade, the green LED light will flash quickly and the camera will
play “upgrading” at the same time. When the firmware upgrade
is complete, the green LED light stops flashing and turn on and the camera
play “upgrading finished”. The camera will restart after upgrade has finished.
*Note: Make sure that your camera is fully charged or connected to the power
adapter before upgrading the firmware. Do not power off the camera during the
upgrade process.
3. Connecting Your VPai Home Compatible Camera