User's Manual

19
In the “Config exist Wi-Fi” interface, you can tap
“Next” to connect your Sync Module to the Internet.
Tap the Wi-Fi name drop-down arrow (iPhones
require manual input), select the Wi-Fi hotspot and
enter the password. The Sync Module will restart
after you tap “Next”. When the Sync Module is
connected to the Internet, the red LED light will stop
flashing.
*Note: 5G network is not supported.
*Note: To reset the Sync Module, press the reset
button on the module for 8 seconds until the red
LED light flashes fast.