User's Manual

31
4. HD Battery IP Camera Firmware Update
You can update the HD Battery IP camera firmware
by either manual update or auto update. For manual
update, you can check the latest firmware on the
Device Settings page of VPai Home app. For auto
update, when you connect the HD Battery IP
camera by using the VPai Home app, it will
automatically detect the latest firmware and prompt
a new firmware update when it is available. If you
choose to accept the update, the green LED light
will flash quickly and the camera will simultaneously
play “upgrading”. When the firmware update is
complete, the green LED light will stop flashing and
the camera will play “upgrading finished”. The
camera will restart after the update has done.
*Note: Make sure the IP camera is fully charged or
connected to a power supply before upgrading the
firmware. Do not turn off the camera during the
update.