User's Manual

6
2. Getting Started with your IP Camera
HD Battery IP Camera supports Android
phones and iPhone connections. The camera
supports automatic video recording to Micro
SD card after startup, and can be played back
in mobile App. To use this feature, you need to
insert a Micro SD card into the camera.
Insert Micro SD Card: When inserting a Micro
SD card, use your fingernail to press the card
into the camera. When it is fully inserted, the
card will snap into the slot. To remove the
Micro SD card, use your fingernail to gently
press the card into the camera and it will pop
up, allowing you to remove it.
*Note: Micro SD card must be formatted in a
FAT32 file system format.
2.1 Power On, Off and Recharging
Turn On: Press the power button for 2
seconds until you hear “power up”, then
release. When the green LED light turns on,
your IP Camera is on.
*Note: The first time the camera is turned on,
the camera will automatically scan for a
connection, indicated by a flashing green LED
light and play “scan QR code”. Please use the
VPai Home App to configure the camera
network, details refers to section 2.2 “Using
Your IP Camera with a phone”.