Electroscopic L =y b Bty L St L Neglect User Manual Pro scenic Technology Co., Lid. E-mail: Web: www.proscenic.com Transcendent Please keep this user manual In your sight, read it thoroughly and carefully before using this product.
| Packing List Host*1 2-in-1 Dust& Charging base*1 Side Brush*2 Adapters Water Tank*1 Remote Controvert Mop*1 Cleaning Brush*1 Mopping cloth pad*1 Marsupial Battery*2
| Product description Host Crescents ¢y start/Stop Button Extended press 1o turn on /Short press to turn off Start/pause cleaning Recharge bunion Short press to start/pause recharging Solid blue light: Normal working Blu light flash: Configuring network Blue light breathing: Starting / Firmware upgrading Yellow light flashes slowly: Low battery / Recharging Yellow light breathing: Charging Red light flash quickly: Abnormal / Error Light off: Off / Sleep Network Configuration While the power is on, press and
| Product description Host and sensor Laser ranging sensor infrared recharge/an— ti-collision sensor sensor Anti-collision sensor Ajr outlet
| Product description Host and sensor Universal whee! side brush Cliff sensor Rolling-Brush Middle sweep caver Right drive wheel Left drive shew! Charging base h‘ Trough Power Interface ‘ Indicator light e Signal emitting area «+ Charging pole place Front of the Charging base The back of the Charging bass
| Installation Notes Installing the charging base Connect the power cord and the charging base is placed against a wall on s flat surface. Against the wall Not against the wall * Make sure that thees Is more than 1.2 meters In front of the charging base and more than 0.5 meters in the left and right sides to ensure a smooth backhoe. * Do not place the cardie in direct sunlight.
| Instructions for use Power on/off Press and hold the ® (U * button to power on, and the host enters the standby state. After booting, press and hold the * (& ” button to shut down. Note: When the host is charging on the charging stand, it will automatically turn on, and 7t cannot be turned off during charging. Start/pause Under the power on state, short press the “ (0" button to start the whole house cleaning. Press any key to pause while cleaning.
| Instructions for use Connect to the mobile client (@ The phone Is connected to WIGHT; 3 Scan the QR code below, or search for “Proscenium” in the mobile app store 1o download the app, register and login 1o the account; App Store @ Add device on the ahem page choose @ Press and hold the *(5° and *O” keys for & seconds to sweeping robot” M6 PRO”; enter the network configuration; @ Select the connected WIFI of the phone ® Go to the mobile phone ELAN list and select and connect and enter the WiF password; the
| Instructions for use Remote control Schedule st On/Pause s Power gels s Note: {Standardization) 1. Te ensure remote control effectively, It Is recommends to use it in the front area of the host; 2. The effective distance of the remote control is 3-8 meters. hearer " he area \La:s than or equal to 3-8 meters e A 11-] et Manual control et i@ Clinging et CROCHETING
| Instructions for use 2-in—1 Dust&Water Tank Switch fo water tank assembly for mopping. Note: Do not mop on the carpet to avoid getting the carpet wet, 1) Open the cover and take out the 2-in-1 dust bin with water tank; @ Getting the mop wet and fix it with hookup. Fill the tank with water and fasten the rubber lid on the water inlet; @ short press start mopping In the app.
| Routine maintenance Dust box and filter assembly (recommended weekly) @ Pen the lid and take off the dust bin; (2 Open the dust box, and dump rubbish; @ Open the dust cover and remove the HEAP filter; @ Shekel off the trash on the filter net and use a cleaning brush to clean the dust box and filter; 1
| Routine maintenance ® After filling clean water into the dust box, shut off the ® After drying the fighter and dust box, replace the filter dust box and shake it to the left and right, and pour out and dust box. the dirty water. Repeat this step several times until the dust box is cleaned; 2-in-1 Dust&Water Tank {it is highly advisable to clean the tank every time the cleaning is finished.
| Routine maintenance @ Take out the HEAP filter.Clean the dust bin with a @ Detach the mop, wash it in the water and dry it; cleaning brush.
| Routine maintenance Main brush {recommended weekly) @ Tum the man unit, press the left and right buckles, and remove the middies sweep cover; @ Remove the roller brush upwards and clean the entangled hair and rubbish with a cleaning brush; @ Replace the rosier brush and Insert the three legs of the middle sweep cover into the slot, press down and fix the buckle. Note: Depending on the application, it is recommended 1o replaces the main brush for 6-12 months to ensure the cleaning effect.
I Routine maintenance Side brush (recommended weekly) D Grab the tilde brush foot and pull out the side brush forcefully; @ After cleaning the tangoed hair and garbage on the side brush, press down the side brush to install it. Note: Depending on the application, 1t Is recommended to replace the side brush for 3-6 months o ensure the cleaning effect.
| Routine maintenance Host and sensor {recommended monthly) Wipe the sensor on the man unit with a soft, dry cloth, Including: .
| Routine maintenance Charging base {recommended monthly) Wipe the charging pole of the charging base with a soft, dry cloth. 17 Universal whee! {recommended monthly cleaning) @ Flip the main unit and pull out the universal wheel upwards; @ Clean the hair and dust on the wheel, axle and support; @ Reinstall the universal whee! and press it tight. Note: Wash with water, dry it and put it back.
| Basic parameters Host Charging base Name Parameters Dimension 153.8mmx74.4mmx38mm Dimensions Rated power 24w Product weight =3.6kg Rated input 20V 1.2A Rated voltage 14.8V— Rated output 20V 2R Rated power 33 Battery capacity 3200mAk | Troubleshooting Fault prompt Solution Abnormal 1. Please confirm that the laser radar Is not blocked Please check or remove foreign objects around the liar or move the device to a new location to restart Abnormal! 2.
| Common problem Question type Solution Can not boot The battery Is low, pleads charge It before using it Ambient temperatures is oo low {less than 0°C) or too high (higher than 50°C) Unable to start cleaning The battery Is low, pleads charge It before starting It Unable to recharge There are too many obstacles beer the charging send. Please put the charging stand in the open area The host is too far from the recharge seat.
| Security Information Use limit + This product Is only urged for floor cleaning In the home environment. Do not use 1t outdoors {(such as open balcony, non— ground (such as sofas), commercial or industrial environments, such as non-ground {such as sofas), commercial or industrial environments. Do not use in environments where thees is liquid or viscous material above 40°C, below 0°C. Do not use or operate this product for people with physical, mental or cognitive impairments, Including children.
| FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: {1) This device may not cause harmful interference, and (2} This device must accept any interference received, including interference that may cause undesired operation. 2. Chang's or modifications not expressly approved by the party responsible for compliance could cold the user’s authority to operate the equipment.