User's Manual

Rev. A1
13
(4) ―Your diastolic pressure is‖ + measured diastolic
value + ―Millimeter of mercury/Kilopascal.‖;
(5) ―Your pulse is‖ + measured pulse value + ―pulse
per minute.‖;
(6) ―According to World Health organization
standard, your blood pressure level is
optimal/normal/pre_hypertension/mild_hypertension/
moderate_hypertension/severe_hypertension.‖;
2. Data Review
1) reviewing average
value:
(1) ―Your average for the last three times:‖;
(2) ―Your systolic pressure is‖ + measured systolic
value + ―Millimeter of mercury/Kilopascal.‖;
(3) ―Your diastolic pressure is‖ + measured diastolic
value + ―Millimeter of mercury/Kilopascal.‖;
(4) ―Your pulse is‖ + measured pulse value + ―pulse
per minute.‖;
2) reviewing measured
value:
(1) ―The measure result is‖
(2) ―Your systolic pressure is‖ + measured systolic
value + ―Millimeter of mercury/Kilopascal.‖;
(3) ―Your diastolic pressure is‖ + measured diastolic
value + ―Millimeter of mercury/Kilopascal.‖;
(4) ―Your pulse is‖ + measured pulse value + ―pulse
per minute.‖;
3. Low Battery
1) in case of low battery
―Low battery, please charge the battery‖
Note:
 ―/‖ means ―OR‖
 text in ―‖ is detail content of broadcast
8.5. Average value
1) Press the 【 】button to read the average value.
2) The screen will display the average data of the most recent 3 sets as show on Fig22 and
broadcast the data.
3) Press the 【 】button to change user group.
 Press the 【 】button when viewing the average value, the average data will flick
and the device broadcasts the data again.
 Without any operation for 20s, the unit will automatically turn to standby mode.
 Under average value mode, press down the 【 】button for 3s to return the clock
Fig22