User's Manual

Rev. A1
4
17) Do not measurement too frequent, or else it may result in bruising where the cuff is
applied.
18) Do not apply the cuff over a wound or inflamed area.
19) Do not apply the cuff on the same limb where intravascular access or therapy or an
arterio-venous (A-V) shunt is present, because of temporary interference to blood flow
and could result in injury to the patient.
20) Do not apply the cuff on the arm on the side where a mastectomy has done, because of
temporary interference to blood flow and could result in injury to the patient.
21) The application of the cuff and its pressurization on the arm can cause temporary
interference to blood flow, but it would not result in injury to the patient.
22) Operation of the device does not result in prolonged impairment of the circulation of the
blood of the patient.
23) Direct plug is considered as disconnect device, please do not place the equipment in a
difficultly operation position.
24) When using the device, the patient is an intended operator.
25) Do not serviced or maintained while in use with the patient.
1.2. Contraindications
1) Do not use the blood pressure monitor for any other purpose except measuring the blood
pressure of human body.
2) Those who have arrhythmia, diabetes, blood circulation or apoplexy problem, please use
under the physician’s instruction.
3) Clinical testing has not been conducted on newborn infants and pregnant women. Do not
use in infants and pregnant women.
4) The common arrhythmia such as atria premature beats, premature ventricular and atrial
fibrillation will lead to inaccurate results or error.
1.3. Care and maintenance
1) The battery can’t be replaced, do not attempt to disassemble, repair or modify the unit or
cuff.
2) Avoid high temperature, moisture, dust and direct sunlight.
3) Clean the body with soft clean wet cloth, do not wipe with alcohol or other corrosive
liquids.
4) Do not wet or clean the cuff with water.
5) Clean the cuff with soft dry cloth after measurement.
6) Do not use at extremely high temperature, high humidity, or high altitude.
7) Do not drop or expose the device to heavy shock.
8) Do not use the unit near large equipment that uses a switching relay for power ON/OFF.
9) Turn off the power switch if the unit will not use for a long time.
10) The blood pressure monitor has gone through several trials of testing to ensure the
measurement accuracy. It is recommended that the performance be checked every 2 years
and after maintenance and repair.
11) Do not disassemble or modify the structure of the unit and damage the safety
performance. If you need service, please contact the manufacturer, the maintenance