User's Manual

Rev. A1

Cuff Label

Fig 2

Note:

Symbol for‖TYPE BF APPLIED PART‖

Display

Fig 3

3. Power source

The device is power by lithium battery, and can be charge using USB cable.

 Turn on the power switch when first used, the power switch is located at the back side of the

device. When the battery is connected to the unit ,the LED display will lit -up for 3

second ,then the device power off.

 When the battery is running low, the battery symbol will turn red and flicker , please connect

the USB cable to charge.

 Connect the AC adapter with USB cable to the USB port of the main unit.

 Plug the socket into electric outlet.

 Use the correct adapter designed for your local voltage (Recommend: Power adapter

specification, AC100-240V, 50/60Hz, 400mA; Output: 5.0V 1.0A.) Which comply IEC

6061-1 standard.

Model: BC××××