User's Manual

Rev. A1
8
6. Standby mode
Under the first touch mode, without operation 2s to enter the standby mode, which can
automatically detect the current settings and display the Bluetooth symbol, Horn symbol, blood
pressure unit and user group.（Fig6）
 Press the 【 】button or without operation 20s during setting, memory and average value
viewing will return to the standby mode.
7. System Setting
7.1 User conversion
The blood pressure monitor is capable to hold 2 sets of memory data. Select the correct user
group before measurement.
User conversion:
 Under the first touch mode and standby mode, press the【 】button will automatically
change the user conversion either from user 1 or user 2.
7.2. Setting
1) Press the【 】button into the setting mode, and Year digits display.
a) Change number.
 Press the 【►】button to increase one number.
 Press the【◄】button to decrease one number.
 Hold down the 【◄】or 【►】button, the number will change rapidly.
b) Enter the digit of year number.(Fig7)
c) Press the 【 】button will proceed to month setting.
d) Repeat step a) to c) to set month, day, hour and minutes.(Fig8 to Fig11)
2) Unit with broadcast.
Fig6