User's Manual
Rev. A1
2
1. Safety Information
1.1 Warning
• Self diagnosis and treatment which use measured results may be dangerous. Follow the
instructions of your physician or licensed healthcare provider.
• Those who have arrhythmia, diabetes, blood circulation or apoplexy problem, please use
under the physician’s instruction.
• If cuff inflation doesn’t stop, remove the cuff or power off the unit, otherwise, it may result in
a hazard condition.
• This equipment is not suitable for the neonate, infant and who can't communicate or interact
independently.
• Do not use the blood pressure monitor for any other purpose except measuring the blood
pressure of human body.
• Only take measurement with the manufacturer supplied cuff or AC adapter, or else it will lead
to inaccurate results.
• Do not use the blood pressure monitor when you are close proximity to strong static
electricity or electromagnetic fields, and avoid using the mobile during measurement.
• Do not use in combination with a hyperbaric oxygen therapy device, or in an environment
where combustible gas may be generated.
• Do not install the unit in the following locations:
- Locations subject to vibration such as ambulances and emergency helicopters.
- A location where there is gas or flame.
- A location where there is water or steam.
- A location where chemicals are stored.
- A location where the unit may easily fall.
• The common arrhythmia such as atrial premature beats, premature ventricular and atrial
fibrillation will lead to inaccurate results or error.
• Measurements or stores need to take into account environment variables, or else it would lead
to the inaccurate measurement.
• When using or replacing the AC adapter and batteries, the operator not to touch those parts
and the patient simultaneously.
• The battery has positive/negative polarity. If the battery does not connect well to the unit, do
not forcibly connect it.
• Do not use Luer lock. If Luer lock connectors are used in the construction of tubing, there is a
possibility that they might be inadvertently connected to intravascular fluid systems, allowing
air to be pumped into a blood vessel.
1.2 Precaution
• Do not attempt to disassemble, repair or modify the blood pressure monitor or hand cuff.
• Avoid high temperature, moisture, dust and direct sunlight.
• Clean the body with soft dry cloth dipped in a concentration of 75% medical alcohol.
• Do not wet or cleaning the cuff with water.
• Clean the cuff with soft dry cloth after measurement.