U10 Printer Quick Guide Portable Thermal Printer Quick Guide Packing list NO.
U10 Printer Quick Guide 2 USB charging wire 1 3 Quick Guide 1 4 The label paper 1/3 Description of appearance and components 1 3 4 2 1 Paper outlet 2 On-off button 3 USB charging port 4 Indicator light OPERATION INSTRUCTIONS ❶Consumable installation ❷Starting up Press and hold the On/Off button to turn on the machine ❸ Shutdown In the boot state, press and hold the power button for more than 3 seconds, after the indicator lights off the key can be released, the printer shutdown.
U10 Printer Quick Guide Note: the type of paper needs to be set by the printer to change the type of paper。 ❺ Print self-check In the boot state, click the power button twice, the printer will print self-inspection page。 ❻ Calibration sensor In the gap paper mode, there is no way to detect the gap of the label paper, you can try to solve this problem through calibration.
U10 Printer Quick Guide 1、Be sure to power off the printer before cleaning 2、Because when printing, the print head will become very hot, so to clean the print head, please turn off the power after waiting 2 ~ 3 minutes to start cleaning 3、When cleaning, please do not touch the print head directly with your hand to avoid damage caused by static electricity。 4、Be careful not to scratch the print head。 Cleaning method： 1、Open the top cover of the printer, use a cleaning pen or cotton swab with diluted alcoho
U10 Printer Quick Guide function a nd perfor ma nce ， the company reserves the right to change the sof tware and hardw are specifications without prior notice. If you f ind any error s or omissions in the infor mation in the se manuals ， Plea se reflect to us or dealer ， we will very gr ateful for this.
U10 Printer Quick Guide FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
