User's Manual

6 7
Balance:
Press the SEL button until “BAL”
(Balance) appears in the display.
Immediately use the or to adjust to desired
speaker balance - 10L to 0 to 10R. 0 is middle
balanced between the Left and Right speakers.
Fader:
Press the SEL button until “FAD”
(Fader) appears in the display.
Immediately use the or to adjust to
desired Front and Rear speaker balance -
10R to 0 to 10F. 0 is middle balanced
between the Rear and Front speakers.
RPT
RPT
RPT
RPT
SE
SE
SE
SE
L
L
L
L
VO
VO
VO
VO
L
L
L
L
VO
VO
VO
VO
L
L
L
L
MODE
MODE
MODE
MODE
RDM
RDM
RDM
RDM
BAL 3L
FAD 8F
ROCK
BOOST ON
DSP (Preset EQ):
Press the SEL button until the “DSP” (Digital
Signal Processor - Equalizer) options appears in
the display. The Equalizer presets to choose from
are: “DSP OFF”, “POP”, “ROCK” or “CLASSIC”.
Immediately use the or to
adjust to desired DSP preset.
Note: If a DSP preset is enabled, Bass and Treble
settings cannot be manually adjusted.
BASS BOOST:
Press the SET/MENU until “BOOST ON” or
“BOOST OFF” appears in the display.
Immediately use the or to turn
on or off.
Sound Controls (continued) Area and Stereo/Mono Selection
AREA:
To select a radio area location, press and hold the SEL
button until an “AREA” location appears in the display.
Immediately use the or buttons to select
between “AREA USA1”, “AREA USA2”
or “AREA EUR”.
STEREO / MONO:
To select “STEREO” or “MONO” when in FM mode,
press and hold the SEL button until an “AREA” location
appears in the display. Then with another short press
either “STEREO” or “MONO” will appear on the display.
Immediately use the or buttons to
make your selection.
RPT
RPT
SE
SE
L
L
VO
VO
L
L
VO
VO
L
L
MODE
MODE
RDM
RDM
AREA USA1
STEREO