User's Manual

ManualsBrandsShenzhen QIAN Electronics Technology ManualsElectronicsSPA DOCK SP3

6 7

General Operations

Power On:

Press the / MUTE button to turn the unit on.

Power Off:

Press the / MUTE button for 3 seconds to turn

the unit off.

Mute:

A short press of the / MUTE button will mute

the audio.

Selecting a Play Source:

Press the MODE button to selected either:

“RADIO”, “AUX” or “BT AUDIO”

Display Brightness:

Press the DIMMER button to select from the

3 levels of brightness for the display area:

“LED LOW”, “LED MID” or “LED HIGH”

Priority Clock Display Selection:

Press and hold the SET/MENU button until

“A_SPK ON” appears. Short press the same

button until “DISP OFF” or “DISP ON” appears

on the screen.

Immediately press Volume buttons to toggle to

either of the 2 desired screen appearances:

1. “DISP ON”: Screen will remain on current

time display.

2. “DISP OFF”: Screen will display current radio

station in RADIO mode, track information in

BT Audio mode or AUX in AUX mode.

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

Sound Controls

Bass:

Press the SET/MENU. The first sound mode

adjustment displayed will be “BAS” (Bass).

Immediately use the the

VOL

adjust to desired Bass level -7 to +7.

Bass, Treble, Balance, Fader, DSP, Boost and Volume Control

Select the desired sound mode by pressing the SET/MENU button. The modes will be displayed in the

following order: Bass, Treble, Balance, Fader, DSP, Boost and Volume.

Treble:

Press the SET/MENU until “TRE” (Treble)

appears in the display.

Immediately use the

VOL

adjust to desired Treble level -7 to +7.

Balance:

Press the SET/MENU until “BAL” (Balance) appears in

the display.

Immediately use the

VOL

to adjust to

desired speaker balance - 10L to 0 to 10R. 0 is middle

balanced between the Left and Right speakers.

Fader:

Press the SET/MENU until “FAD” (Fader) appears in

the display.

Immediately use the

VOL

to adjust to

desired Front and Rear speaker balance -

10R to 0 to 10F. 0 is middle balanced between the

Rear and Front speakers.

Volume:

Increase the volume by pressing the

VOL

button.

Decrease the volume by pressing the

VOL

button.

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET