User's Manual

ManualsBrandsShenzhen QIAN Electronics Technology ManualsElectronicsSPA DOCK SP3

8 9

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

Sound Controls (continued) Setting the Clock

DSP:

Press the SET/MENU until the “DSP” (Digital Signal

Processor - Equalizer) options appears in the display.

The Equalizer presets to choose from are: “DSP OFF”,

“POP”, “ROCK” or “CLASSIC”.

Immediately use the

VOL

to adjust to

desired DSP preset.

Note: If DSP preset is enabled, Bass and Treble

settings cannot be manually adjusted.

1. Press and hold the CLOCK/DIMMER button until the

clock appears in the display.

2. Press and hold again until the time begins flashing.

3. Immediately use the

VOL

to set the minutes and

VOL

to set the hour.

After 5 seconds of inactivity, the display will return

back to the main screen and the clock will be set.

Notes: Select AM or PM when setting the hour.

BASS BOOST:

Press the SET/MENU until “BOOST ON” or

“BOOST OFF” appears in the display.

Immediately use the

VOL

to turn

ON or OFF.

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

Speaker Selection and Stereo/Mono

Speaker Set A On/Off:

• Press and hold the SET/MENU button until the

display reads AREA USA 1. Immediately press

again until either “A SPK ON” or “A SPK OFF”

displays. Then press either the

VOL

to turn ON or OFF.

Speaker Set B On/Off:

• Press and hold the SET/MENU button until the

display reads AREA USA 1. Immediately press

again twice until either “B SPK ON” or “B SPK OFF”

displays. Then press either the

VOL

to turn ON or OFF.

STEREO / MONO

• Press and hold the SET/MENU button until the

display reads AREA USA 1. Immediately press again

3 times until either “STEREO” or “MONO” displays.

Then press either the

VOL

make selection.

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

MUTE

APS

FM/AM

MODE

VOL VOL

2 3 4 5 6

ALARM

CLOCK

DIMMER

SET

Alarm Operation

Setting the Alarm Timer

1. Press and hold the SET/MENU button until the

AREA_xxx appears in the display.

2. Immediately press again 4 times until “ALARM OFF”

appears in the display.

3. Immediately press either the

VOL

the

VOL

to turn the alarm function on -

“ALARM ON”.

4. To set the alarm time:

(The radio must be set to “ALARM ON”)

• Press and hold the MODE/ALARM button until the

alarm time appears in the display.

• Press and hold again until the time begins to flash.

• Immediately use the

VOL

to set the minutes and

VOL

to set the hour to desired time.

• After 5 seconds of inactivity, the display will return

back to the main screen and the alarm will be set.

Shutting off the Alarm

When the alarm sounds, press the MODE/ALARM

button to shut off.

To disable set alarm time use steps 1-3 of Setting

the Alarm Timer and toggle to “ALARM OFF”.