Product Card

Case installation notices
1. The FPC cord needs to be bent; try to fold it at the
end side instead of the middle position. The position
selected by the red box in the right picture is the
position we recommend to be folded 90 degrees.
2. The screen line will inevitably be bent; try to follow
the principle of making the middle white segment
without creases.
3. After installing the screen, turn on the power for the
first time to see if the screen can still light up normally. It
will display the Fiberpunk logo and then continue with
the subsequent assembly.
4. Do not pinch the FPC wire or fray its sides.