User's Manual

ManualsBrandsSHENZHEN QIAOHUA INDUSTRIES ManualsElectronicsFog Machine

400W Metal Fog Machine with

Wireless Remote Control Set

User Manual

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

IMPORTANT SAFETY INSTRUCTION

CAUTION:

-Risk of burn, fire or electrical shock.

-For indoor use only.

-Please read instruction manual before using.

-Don’t immerse in liquid.

-Not for space heating purpose.

I. FOG MACHINE TECHNICAL SPECIFICATIONS

Item Code：5724042 Fuse: 5A, 125V

Model: FM400-E

Preheat Time: 3~ 5 Minutes

Rating Voltage: AC120V, 60Hz

Fog Output: 2,000 CFM

Power: 400W Tank Capacity: 0.55 Liter

Ambient Temperature: -10 ~ 45°C Dimensions: L236.5 × W147 × H194 mm

L9.3 × W5.7 × H7.6 inch

II. RECEIVER: TECHNICAL SPECIFICATIONS

Item Name: Receiver Model Number: QT-14R

Rating Voltage: AC120V, 60Hz

Working Current: 50mA Max.

III. TRANSMITTER: TECHNICAL SPECIFICATIONS

Item Name: Transmitter Model Number: QT-14T

Working Voltage: 12V DC

Working Current: 15mA Max.

Require: 1 x 12V, 27A Battery (Included)

WARNING:

To prevent risk of personal injury, fire, and electric shock:

● Never leave unit unattended while plugged in. Unplug when not in use.

● Read all important safety instructions and cautions.

● Connect only to a properly grounded outlet.

● Place product on a flat, level HARD surface and conn ect the cord to prevent the

product from overturning.

● For use only in covered areas. Keep unit dry, do not expose to rain or moisture. Do not

immerse unit.

Summary of content (4 pages)

PAGE 1
400W Metal Fog Machine with Wireless Remote Control Set User Manual READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT SAFETY INSTRUCTION CAUTION: -Risk of burn, fire or electrical shock. -For indoor use only. -Please read instruction manual before using. -Don’t immerse in liquid. -Not for space heating purpose. I.
PAGE 2
● ● ● ● ● ● ● ● ● ● ● Leave enough space for good ventilation. Keep unit cool and away from other objects. Use only with SVI Fog Liquid (sold separately). Do not operate unit without fog liquid. Pour fog liquid carefully to avoid spills which could result in electrical shock. Do not use if liquid spills onto unit. Let unit dry completely before plugging in. Do not overfill the liquid. Keep away from flames and flammable/explosive substances to avoid fire or explosions.
PAGE 3
ADDITIONAL INFORMATION a) It is normal for condensation to appear on the nozzle of the Fog Machine. b) A small amount of fog may spray during or after operation. c) The unit will have to reheat after long bursts of use. The unit will stop operation for a short period in order to heat up to operating temperature again. While this is happening, fog cannot be produced. The light on the Receiver will turn on again when the unit is ready to generate more fog.
PAGE 4
WARNING: Risk of electric shock and fire. Disconnect from power socket before replacing the fuse. 1. Turn the fuse knob counterclockwise to reveal the fuse. 2. Replace the fuse with the same size and type fuse: 5A, 125V 3. Place fuse in cover and reinstall by turning clockwise. Be sure not to over tighten. Note: This device complies with Part 15 of the FCC Rules.