Installation Instructions

5. If using camera or user management features, internet access is required. In order to access
the internet your BAT-Connect must be connected via ethernet or Wi-Fi. In addition you must
log in to the Alula platform using the account owner username and password. To log in go to
Settings and select Touchpad. Enter master code, then select Alula Cloud.
6. Test the Touchpad by arming and disarming the system from the Touchpad.
Touchpad Mounting Options
Table Top Mounting
1. Connect the power adapter by inserting the connector into the black port. Once inserted,
turn the connector to the right to lock into place.
2. Slide the Touchpad onto the stand. The fit is intended to be quite snug, so some force may
be required for the stand to “click” into place.
3. Coil up the excess power wire into the stand, and close the stand cover to contain the wires.
4. Plug in powersupply.