User's Manual

Installing the Batteries

The Wireless mouse use two AAA NI-MH

rechargeable batteries.

Step 1. Open the battery compartment.

Step 2. Insert the batteries as shown

inside the battery compartment.

Step 3. Replace the cover.

Connecting the Receive

USB Version

The receiver is connected to your computer via a

1.5 meter USB cable. And it plug to USB port of

your computer.

USB Port USB port installation

Connect the USB plug to USB port of your computer.

CAUTION:

Windows 98 or higher or Macintosh OS 8.6 or higher is required for USB

port installation. Connect the receiver cable to the USB port on computer.

For Windows, you may be prompted to insert the Windows software CD.

Insert this software CD into the computer’s CD-ROM driver when asked

To do so. Then follow the on-screen instructions.

Indicators on Receiver

There is two indicator on the Receiver.

Connect：the indicator will flash when you press

The connect button. When the receiver

Successful change the IDS, the indicator

will flash several fast.

Charging: the indicator will light on in RED color when charging the

battery in mouse, the indicator will turn off when the battery

is full.

Changing the channel and security ID

Your mouse come with multi security ID, Which can let your Receiver

listen to one mouse, Do following step to change channel and Security ID

when you get undesired interference from another device used nearby.

1. Press the connect button on front of the receiver.

2. Press the connect button on the bottom of the mouse.

NOTE:

1. The indication LED will light steadily when the synchronization linkage

is completed.

2. You need to do above steps to re-connect the mouse each time you

replace battery.

Quick Start Guide

For

Wireless Rechargeable Mouse

P/N：266-800F1-0000

PAGE 1
Quick Start Guide For Insert this software CD into the computer’s CD-ROM driver when asked To do so. Then follow the on-screen instructions. Indicators on Receiver Wireless Rechargeable Mouse P/N：266-800F1-0000 Installing the Batteries The Wireless mouse use two AAA NI-MH rechargeable batteries. Step 1. Open the battery compartment. Step 2. Insert the batteries as shown inside the battery compartment. Step 3. Replace the cover. There is two indicator on the Receiver.
PAGE 2
Charge the Battery in Mouse Your mouse uses one AAA size Ni-MH rechargeable batteries. Before you use the mouse, you need to place the mouse on the stand to charge the batteries for 10 hours. This is very important to battery life. Please make Sure the charge indicator is light ON when you charge the mouse. When you feel your wireless mouse is not working smoothly, that means that the batteries need to recharged.