Instruction Manual

4. Troubleshooting/4.2 Wi-Fi Connection

Before Wi-Fi setup, make sure Robot, mobile phone, and Wi-Fi network meet the following requirements�

Robot and Mobile Phone Requirements

• Robot is fully charged and the power switch of Robot is turned on�

• Wi-Fi status light slowly ashes.

• Turn off mobile phone’s cellular data (you can turn it back on after setup).

Wi-Fi Network Requirements

• You are using a 2�4GHz or 2�4/5 GHz mixed network�

• Your router supports 802�11b/g/n and IPv4 protocol�

• Do not use a VPN (Virtual Private Network) or Proxy Server.

• Do not use a hidden network�

• WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.

• WEP EAP (Enterprise Authentication Protocol) is not supported.

• Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North America (refer to local regulatory agency).

• If you are using a network extender/repeater, the network name (SSID) and password are the same as your primary network.