User's Manual

17.
18.
19.
Product storage: the helmet shall be stored in a well-
ventilated indoor place;before the helmet is to store for a
long time, please charge it fully and keep power-off; it’s
advisable to do periodic charge every two months, being
fully loaded.
Functions are not comprehensively introduced in this
manual, among the type of smart helmet *** 001A/B/C,
due to different configurations of them.
Service life of the helmet: 3 years
Ⅴ：Camera Functions & Mobile APP
1.For iPhone users, please search in the APP Store“LuckyCam”
or scan QR code to download the APP and install in the phone;
For Android users, please search in the market store
“LuckyCam”or scan QR code to download the APP and install in
the phone.
(Registration is not requested to use the APP for the first time
both.) in mainland and abroad.
2.Press On/Off and hold for 2 seconds Please listen carefully
to voice like "Bluetooth has been turned on waiting for
connection" (or it says Bluetooth connected after successful
connection); meanwhile, Bluetooth, lights and recording
camera are on and standby.
3.Press the ⑤WiFi button and hold for 1 second to start
recording, press again to stop recording; please listen carefully
to voice like "Recording is on" or "Recording is off"; after WiFi
gets connected, user can start or stop recording by pressing
relative button.
4.Press the ⑤WiFi button and hold for 3 seconds to turn on
WiFi signal; press the button again to disconnect WiFi; please
listen carefully to voice like "WiFi is on" or "WiFi is off"; WiFi
automatically turned on once helmet is on; if no operation of
connecting WiFi in 5minutes, WiFi will shut down.
LuckyCam APP
Android
iOS
6