Quick Start Guide
Setup WiFi System on Reolink Client (For PC)
Please download the client software from our ocial website:
https://reolink.com/software-and-manual and install it.
Launch the Reolink Client software and manually add the NVR to the Client.
Please follow the steps below.
• PC is in the Same Network with NVR
1. Click “Add Device” on the right-side
menu.
2. Click "Scan Device in LAN".
3. Double click on the device you want to
add. The information will be filled in
automatically.
4. Input the password created on Reolink
App or on NVR to log in.
Note: The default password is blank. If
you've already create a password on the
mobile app or on NVR, you need to use
the password you've created to log in.
5. Click “OK” to log in.
• PC is Not in the Same Network with NVR
1. Click “Add Device” on the right-side menu.
2. Choose “UID” as the Register Mode and type in the UID of the NVR.
3. Create a name for the camera displayed on Reolink Client.
4. Input the password created on Reolink App or on NVR to log in.
Note: The default password is blank. If you've already create a password on the mobile app or on NVR,
you need to use the password you've created to log in.
5. Click “OK” to log in.
8 English 9English