. . Download and install JXLCAM. IOS searches for "JXLCAM" download directly at the Apple App Store. For convenience, please scan the download and installation of the QR code below. Note: during installation, all permissions of the JXLCAM APP need to be allowed, otherwise the APP will not work properly.
. Open the list of mobile phones WIFI, connect to B/xCCQ..., open the APP page after success, click "AP" as shown in the figure below, and watch the video. Note: when there is no WIFI in the environment, you can use AP mode to connect, which is valid for no more than 10m, which can achieve localized video viewing. 3. 1.First confirm that there is a available WIFI near the device, turn on the device, flash the blue indicator light quickly, and the device is in a state to be connected.
ķClick“+” ĸClick "AP add Device" ŊClick "···" ĺClick4FUUJOHT
Ļ.Click "WLAN" ĽEnter the correct WIFI password and click ĀNextā ōSelect to connect your 2.4G band WIFI, and then click JXLCAM in the upper left corner to return to the APP. ľ.Click "...
ĿClick Ā6ettLngsā ŀClick“WLAN” 䢈Connect to the device hotspot "B/XCCQ..." Then click JXLCAM in the upper left corner to return to APP.
䢊Wait for distribution network. 䢌Customizable name, clickĀnextā 䢋After seeing the success of the distribution network, click“Next” . 䢍You can view the camera preview page on the home page.
4. Local mode Add the device Device nickname SD card playback file Networking status View videos/photos in local mode.
5. Settings 1IPUP -JTUFO 5BML Products with speakers can be used Switch left and right Sharpness switch 3FDPSEJOH Landscape switching "MBSN Indicator light ON/OFF Infrared lamp ON/OFF Switch up and down . If you need to store video content, you need to install an SD card.
. Modify the device name Modify user name Share the QR code to the person who needs to connect the device. Format TF card Restart the device factory data reset Note: sensitivity and alarm interval can be set for motion detection. Click'Ŷ'. 1. When the device fails to con¿gure the network, please check whether the router and WiFi password are con¿gured correctly (the device does not support WIFI signals in the 5.8G band).
