User's Manual

（V1.0）
8
F Operating Current: <80mA
F Charge voltage: 4.2V - 5.05V
F Charge current: <300mA
l Computer system requirements
F Windows 2000
F Windows XP
F Windows Vista ,Windows CE, Windows 7
F Linux(Debian-3.1,Redhat-9.0 Ubuntu-8.10 Fedora-7.0 tested)
6.2. Maintenance
l Battery Caution
F Do not try to disassemble the machine or replace rechargeable batteries without permission,
otherwise the resulting loss has nothing to do with the manufacturer.
F Battery charging time depends on the remaining battery capacity and battery / charger type.
The battery can be charged and discharged hundreds of times, but eventually wear out. When the
battery operating time was significantly shorter than usual, it’s time to replace the battery, please
contact your local dealer.
F A charged battery without use within a certain period will be self-discharge.
F Use the specified charger. When the charger not in use, please cut off the power, do not let the
battery connected to a charger more than a week, over-charging will shorten battery life.
F Do not place the machine at the places too hot or too cold, such as: In the summer or winter, a
closed car. This will reduce the capacity of the battery life. Try to keep the machine at room
temperature. Use too hot or too cold battery, even if the battery is fully charged, it may be
temporarily not working. Lithium-ion batteries are particularly subject to the impact of sub-zero
temperatures.
l Careful maintenance
This equipment is designed by excellent designers, please carefully care.The following recommendations
can help you to comply with warranty, so the machine can be used for many years. When using this
equipment:
F Put this device and all its parts and accessories at the place where children can’t reach.
F Do not place this equipment at dusty place, or it's moving parts will be damaged.
F The touch pad is the most vulnerable part, should avoid strong impact by other objects or
scratching.
F Do not put it at hot place, high temperatures will shorten the life of electronic devices
F Do not put it at too cold place, when the device temperature rise (to its normal operating
temperature) there will be water vapor generated inside the device, which could damage the
device's electronic circuit boards.
F Do not drop, knock or shake the device, violent action would undermine the internal circuit
boards.
F Do not use rough chemicals, cleaning solvents or strong cleaning agents to clean it, gently scrub
with a soft cloth soaked in soapy water to clean it.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn