User's Manual

（4）When prompt for passkey, leave the passcode
field blank and tap “Next” (if this fails, enter 0000 as a
passcode and press Next)
(A)At this step select the “Input device” service and
tap “Finish”.
(B)Go to the Software settings Panel, and tap
“Connect”.
Here are a few solutions for the error messages that might
appear in the software:
 "The software is not responding. You need to
reinstall this software."
This error is caused by a problem with the
communication between the software components.
You need to check if your Windows Mobile Device is
compatible with the software, and to try to reinstall
the software.