User's Manual

folder on your device.
6. On the device,click on Start,Program,File
Explorer,My Documents.
7. Run the windowsmobile.cab file by taping on
it.
8. The Bluetooth keyboard drivers will install on
your device.
9. After your device is reset,ensure the
keyboard is in pairing mode.
10. On the device open”Bluetooth Devices”and
click”Add New”.
11. After the keyboard is discovered,select it and
then tap on”Next”.
12. When prompted for the passkey leave the
field blank and click on”Next”if the pairing
fails,repeat this step and use”0000”as the
passcode.
13. Ensure”Input Device”is checked and tap
on”Finish”.
14. Go to the Software settings panel and tap
on”Connect”
Troubleshooting:
The software is not responding.You need to
reinstall this software-This error is caused by a
problem with the communication between the
software components.Check to ensure your
Windows Mobile Device is supported by the
keyboard(Version 5.0 or higher)and try to reinstall
the software.
Bluetooth is turned off-Bluetooth needs to be
enabled in ordr to use this device.Make sure to turn
it on in the settings menu.
No active input device found-Make sure the
keyboard is properly paired with your smartphone.