User's Manual

Indy R2000 Series Module Evaluation Kit User Manual
COPYRIGHT ©
5 SHENZHEN RODINBELL TECHNOLOGY CO., LTD.
1. Open the software and it will shows as below:
2. Please select RS232 as Connection if the reader is connected via RS -232 port, Choose the
corresponding Serial Port and Baudrate (default baudrate is 115200). As illustrated below:
3. Click Connect , if it succeeds, the Operation History will display as below:
If the reader is connected via TCP/IP, please follow those steps:
 Ensure that an Ethernet Card has been installed in the PC.
 Ensure that PC and reader in the same network segment.