User's Manual
Indy R2000 Series Module Evaluation Kit User Manual
COPYRIGHT ©
9 SHENZHEN RODINBELL TECHNOLOGY CO., LTD.
Repeat Per Command, which is the times of repeat inventory command. For example, inventory
command will execute anti-collision algorithm one time when you set the value to 1. It will execute
anti-collision algorithm two times when you set the value to 2...
2. Click Inventory, you will find that the EPC number is uploaded immediately and it is real-time updating.
The reader will keep inventory until you click Stop as shown below:
Inventoried Quantity
Total number of inventory tags since click on Inventory Tag.
Speed
Speed of identification Tag, unit: piece / sec
Total Tag Communication
Total return EPC data of tags (Including repeated data)
Command Duration
Time of each Inventory Command takes, unit: ms
Total Inventory Duration
Total elapsed time since click on Inventory Tag, unit: ms.
ID
The serial number of data.
EPC
EPC number of tag.
PC
Protocol Control word of tag.
Identification Count
Times of tag identified.
RSSI
The signal strength when tag was identified at the last time.
Carrier Frequency
Carrier Frequency of tag which is identified at the last time.
Method NO.2: Buffer Mode
1. Click Inventory, the screen will display as below: