User's Manual

S-8600 UHF RFID Reader User Manual
UHF RFID User Manual
16
The following describes how to read or write the tags.
2.4.1 Read tag operation
You can type the parameter in the interface as illustrated below:
To read tags, you need to input three parameters: Area of Tag, Start Address and Data
Length.
Note, the unit of Starting Address and Data Length is WORD which is 16 bit double-byte.
Click on Inventory, when the parameter setting completes.
Note, the parameters you input must meet the specification of the tag, or an error message
will appear.
When the operation completes successfully, the following screen displays: