User's Manual

S-8600 UHF RFID Reader User Manual
UHF RFID User Manual
6
Then, you need to switch the DIP switch to the position as illustrated below:
You can also connect PC to the reader via TCP/IP, as illustrated below:
Then, you need to switch the DIP switch to the position as illustrated below:
About DIP Switch：
1、①：EN, ON Status, EN is low level.
2、②：GPIO1, ON Status, GPIO1 is low level.
3、③④：TCP/IP, ON Status is TCP/IP communication.
4、⑤⑥： Blank.
5、⑦⑧：RS232, ON Status is RS232 communication.