User's Manual

S-8600 UHF RFID Reader User Manual
UHF RFID User Manual
7
2.1.4 Step 4: Operating Reader via Demo
Launch the supplied Demo. This software don’t need to installation. Just put the
UHFDemo.exe, reader.dll, customControl.dll into the same folder, and double-click
UHFDemo.exe to run the software.
Launch the UHF Demo application, the following screen displays:
Please select RS232 in Connection if the reader is connected via RS -232 port. Selecting the
corresponding Serial Port number and Baudrate, default baudrate is 115200. As illustrated
below:
Click on Connect , if the port isn’t occupied, the Operation History will displays: