User Manual

5 / 15
Fully charge the headset before using. For details about how to charge the headset, see "Charger and Battery" in this manual.
Meanwhile, choose the cell phone that is compatible with the headset or other Bluetooth devices to pair with the headset.
For details about pairing, see "Basic Operations".
Tip: Keep the headset away from your credit card or other magnetic storage media; otherwise, the stored information may
be lost due to demagnetization.
Basic Operations
○ Powering on and Pairing: Turn down the toggle switch. The red and blue indicators blink at the same time for
three times. The voice prompt "The headset is powered on" is played on the earphone. Then, the voice prompt
"enter the pairing status" is played. If the Bluetooth version of the headset is earlier than V2.1, you need to enter the
pairing password "0000". The headset is automatically powered off if pairing is not completed within 150 seconds.
○ Connecting: After successful paring with the cell phone, the headset is connected to the cell phone. The voice
prompt "Paring is completed and the headset is connected" is played. If you cancel pairing, the voice prompt
"Bluetooth disconnected" is played, and the headset enters the standby state.