User Manual

6 / 15
○ Automatic Re-Connecting: When powered on, the headset is automatically connected with the cell phone that the
headset has previously paired with.
○ Releasing a Call: During a call, you can press the MFB button to release the call, and a buzz sound can be heard.
○ Rejecting a Call: When there is an incoming call, you can press the MFB button for about 1 second. Then, a buzz
sound is heard, accompanied with the voice prompt "Call rejected".
○ Call & Audio Switching: During a call, you can press the MFB button twice to switch between the call and the
audio service.
○Receiving a Call: When there is an incoming call, you can hear a voice prompt "You have an incoming call",
followed by the calling number. You can press the MFB button to answer the call.
○Last Number Redialing: In the standby state, you can press the MFB button for about 1 second. Then, a buzz
sound is heard, accompanied with the voice prompt "Last number redialed". You can press the MFB button again
to cancel the redialing.
○Anti-Lost Warning: The voice prompt "The headset is disconnected" is played, and the blue indicator blinks
quickly. About 5 minutes later, the headset enters the pairing state. (If the headset is held close to the cell phone