User Manual

8 / 15
Press and hold the MFB button for about 1 second, the current call (A) is held, and the incoming call (B) is answered.
Press and hold the MFB button for about 1 second again, and A is recovered. You can repeat the same operation to
switch between A and
During a call, you can press the MFB button to end the current call and recover the other call.
○ Powering Off: In any state, you can turn up the toggle switch to power off the handset. The voice prompt "The
headset is powered off" is played.
○ Enable/Disable Voice Control: If you double-press the MFB button in the standby state, a buzz sound is heard,
and the voice prompt "Voice dialing" is played. Press the MFB button again, and the voice control function is
disabled. (It is assumed that your cell phone supports the voice control function.)
○ 1-to-2 Multipoint Connection: First, pair the headset with cell phone A, and disable the Bluetooth function of A.
Then, pair the headset with cell phone B, and enable the Bluetooth function of B. If your cell phone supports the
automatic re-connection function, the Bluetooth headset will be automatically connected to A. Alternatively, you can
press the headset to re-connect to A. At this time, the Bluetooth headset can be concurrently connected to A and B.
○ Intelligent Call Releasing: You only need to put the headset back to the charging base to release a call.