User Manual

9 / 15
○ Intelligent Sleep Mode: If the headset battery is low or the headset is not in use, you can put the headset back to
the charging base, and the headset will enter the Sleep mode. Next time when you take the headset out of the
charging base, the headset is automatically powered on, and paired and connected to the cell phone.
○ Intelligent Call Answering: If there is an incoming call when the headset is mounted on the charging base, you only
need to take the headset out of the base to answer the call.
○ Switching Between Four Languages: In standby state, you can press and hold the MFB button and the volume up
button"+" at the same time for about 1 second to switch between four languages.
Charger and Battery
Before using any charger to charge this headset, check whether the specifications of the charger meet requirements.
The recommended output voltage of the charger is 5±0.25 V DC, and the recommended output current is 100 mA to
500 mA. An over-high charging voltage may damage the headset.