ISOUND-6770 User guide Guide de l'utilisateur Guía de usuario FCC ID:2ADORBASSONIX www.isound.
ENGLISH Includes Bassonix, remote, charge cable, audio cable, and user guide Bluetooth® button Volume buttons Mode button AUX IN Power switch Charge port Scan button Track buttons Play/pause button Power button Scan button Track back Volume down Digital keypad buttons Mode button Bluetooth® button Volume up Track forward Play/pause button Confirm button
Specifications Driver size: 52mm x 2 Output power: 8W (4W x 2) Bluetooth® v4.0, up to 30 foot transmission range Battery: 2,600mAh Play time: Up to 8 hours at 70% volume Charge time: 4 hours Frequency response: 100 Hz - 20 kHz Impedance: 4Ω Speaker button functions Bluetooth button • Press and release to go into Bluetooth mode. • Press and hold for 3 seconds to disconnect from Bluetooth pairing (to allow another user to connect).
Scan button • Press and hold for 3 seconds to enable the scan/channel save function. NOTE: The scan button only functions while in FM mode. Track buttons In Bluetooth/AUX IN mode: • Press and release the track forward button to go to the next track. • Press and release the track back button to go to the beginning of the current track. • Press and release the track back button twice to go to the previous song. In PC/speaker mode: • Press and release the track forward button to go to the next track.
Remote button functions Power button • Press and hold for 3 seconds to turn on the speaker. • Press and hold for 3 seconds to turn off the speaker. NOTE: The power button only sets the speaker to standby mode. You must still use the power switch to completely turn off the speaker. Mode button • Press and release to cycle through the different modes. Modes include: • Bluetooth mode – To play wireless via Bluetooth The screen panel will display “bL” when connected.
NOTE: The volume buttons only control the volume of the Bassonix. Device volume should be adjusted separately. Bluetooth button • Press and release to go into Bluetooth mode. • Press and hold for 3 seconds to disconnect from Bluetooth pairing (to allow another user to connect). NOTE: You can only disconnect a device from Bluetooth while in Bluetooth mode. Track buttons In Bluetooth/AUX IN mode: • Press and release the track forward button to go to the next track.
NOTE: When listening to the radio in FM mode or playing music via audio cable in AUX IN mode the play/pause button only serves as a mute button. The track will still continue to play but will remain muted until the play/pause button is pressed again. Digital keypad buttons • Press numbers for specific FM radio stations while in FM mode. NOTE: The digital keypad buttons only function while in FM mode.
with the included charge cable. Connecting via Bluetooth® (first time set-up) 1. Move the power switch on the right side of the Bassonix to the “ON” position and the speaker will say what mode it is in. If the speaker is not in Bluetooth mode, press the mode button until the speaker says “Bluetooth mode” and the screen panel will flash red dash lines. 2. Open the settings on your Bluetooth device (Bluetooth must be enabled). 3. Select Bassonix from the list of Bluetooth devices. 4.
3. Plug the other end of the cable into your audio device. 4. Volume can be adjusted separately from your device or the speaker. NOTES: • Sound will not play via audio cable if the speaker is in Bluetooth mode. • When playing via audio cable in AUX IN mode the play/pause button only serves as a mute button. The track will still continue to play but will remain muted until the play/pause button is pressed again. • The volume buttons only control the volume of the Bassonix.
PC volume should be adjusted separately. Using the FM radio (First time set up) 1. Move the power switch on the right side of the Bassonix to the “ON” position and the speaker will say what mode it is in. If the speaker is not in FM mode, press the mode button until the speaker says “FM mode” and the screen panel shows an FM radio station. 2. Press and hold the scan button on the speaker or remote for three seconds and release for the speaker to begin the scan/channel save function.
Troubleshooting Issue: My speaker doesn’t turn on. Solution: Try the following: • Make sure that you fully charge your speaker before use. • Turn the speaker off and then back on until you hear a voice. • If you are using the remote, confirm the power switch on the speaker is set to the “ON” position and the battery in the remote is still in working condition. Issue: My speaker isn’t charging. Solution: Try the following: • Make sure that the charge port on the speaker is free from dust and debris.
Issue: I selected my saved FM radio channel with the digital keypad buttons, but it is not going to the channel I selected. Solution: Make sure you are using the track forward/backward buttons to find your saved FM radio channels. The digital keypad buttons and confirm button can only be used to find a specific FM radio station. Issue: I brought my speaker on vacation but my FM radio channels are not saved. Solution: Make sure you fully run the scan/channel save function before each use of the FM radio.
FCC information This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
or transmitter. Warranty information All dreamGEAR/i.Sound products come with a limited warranty and have been subjected to a thorough series of tests to ensure the highest level of dependability and compatibility.
Consumer support email support@dreamgear.net Websites www.isound.com | www.dreamgear.com Save a tree, register online dreamGEAR/i.Sound is making the eco-friendly choice to have all products registered online. This saves the printing of physical paper registration cards. All the information you need to register your recent dreamGEAR/i.Sound purchase is available at: www.dreamgear.
www.isound.