User's Manual

+
VOL
PAIR
Overview & Controls
1. Power on the unit by sliding the Power Switch
to the ON position, and press and hold the
Play/Pause/Speakerphone/Pair button for
approximately 7 seconds. When pairing, remain
within 3 feet of the unit.
2. Using the controls on your Bluetooth device,
select IAEB25 in your Bluetooth settings to pair. If
your device requests
a password, enter the default password
0 0 0 0 .
3. Refer to the user’s manual for your specic device
for instructions on pairing and connecting
Bluetooth devices. After initial pairing, the unit
will stay paired unless unpaired manually by the
user or erased due to a reset of the device.
If your device should become unpaired or you nd it
is unable to connect, repeat the above steps.
Note: The Play/Pause/Speakerphone/Pair button
doubles as the LED Indicator.
Pairing a Bluetooth Device
LED Indicators
Status Indicators
Power On Flashing blue light
Low Battery Flashing red light
Charging Red light
Finished Charging Light OFF
Pairing Wireless Flashing red and blue lights
Micro-USB
Power Port
Power Switch
(side)
Mic
(side)
Volume +/−
Features
• Supports Bluetooth
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Digital volume control
• Built-in microphone
• Micro-USB port for battery recharge
• Wireless range: 33 feet
• DC battery power: built-in rechargeable lithium
ion battery
• Battery life: approx. 4 hrs at 100% volume
6 hrs at 50%
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB cable
• Carry pouch
Includes
Battery Power
1. Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor to charge the
unit. Charge fully before use.
Initial charge time is approximately 2 hours.
The LED indicator will display a red light when
charging, and turn blue when fully charged.
Playing Audio Wirelessly
1. Use the controls on the connected Bluetooth
Device to select a track.
2. To play or pause the selected track, use the
controls on the connected Bluetooth Device
or press the Play/Pause/Speakerphone/Pair
button.
3. Audio played through the connected Bluetooth
device will now be heard through the speakers.
Using the Speakerphone
1. To accept a call, press the Play/Pause/
Speakerphone/Pair button, or use the controls
on the connected phone.
2. To end a call, press the Play/Pause/
Speakerphone/Pair button, or use the controls
on the connected phone.
3. To re-dial the last dialed number, press the Play/
Pause/Speakerphone/Pair button twice.
Play/Pause/Speakerphone/Pair
Press and hold to pair
Press to play or pause the current track.
Press to answer an incoming call.