User's Manual

RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use
Notice: this radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their
exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use.
Federal Communication Commission (FCC) Regulations
When Digital Two-Way Radiois used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet
occupational requirement. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Digital
Two-Way Radio has a RF Exposure Product Label. Also, your Digital Two-Way Radio user manual includes information and operating instructions required to control
your RF exposure and satisfy compliance requirements.
Compliance with RF Exposure Standards
Your Digital Two-Way Radio is designed and tested to compliance with a number of national and international standards and guidelines for human exposure to radio
frequency electromagnetic energy. This radio compliance with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at
operating duty factors of up to 50% talk – 50% listen and is approved for occupational use only. In terms of measuring RF energy for compliance with these
exposure guidelines, your radio generates measureable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby
mode.
Your Digital Two-Way Radio complies with the following RF energy exposure standards and guidelines:
● United States Federal Communications Commission (FCC), Code of Federal Regulations;
● Institute of Electrical and Electronic Engineers (IEEE) C95.1
● International Commission on Non-lionizing Radiation Protection (ICNIRP)
RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations
To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures;
● DO NOT remove the RF Exposure Label from the device
● User awareness instructions should accompany device when transferred to other users.
15