User's Guide

Power-Power off: This is for switching off the beacon device without pressing the physical button.
SATECHBeacon tags have a physical button, but the button function is only programmed for
“Power on” and “SOS”. When you want to switch off the beacon, you can click “Power” and then
choose “Yes” in the message interface of “Power off” (“No” means quitting powering off) and
meanwhile see a twinkling red LED light.
Password: This is for setting up a password which the manager uses to program or modify then
save the beacon data. Attention: the password must be 8-digit characters.
B. Modify and save the beacon data
You can modify any data of 7 broadcast channels, and then save all that you have modified with a
password “satech88”.