FCC ID：2AT5F-SY-101A IP Camera Operation Manual Dear users, you are welcome to choose this product.
1、Main Function Description 2、How To Download Mobile APP Search and download “YCC365 Plus” in Apple Store or Android app store.
、How To Operate The Mobile APP 3.1 Register an account When you use this app at the first time, you need to use your email to register an account, click “Sign Up” and set a password according this procedure. *If you forget your password, you can reset your password, just click "Forgot password” on the login page. *Password should be at least 6 characters and not longer than 30 characters. It should be a combination of letters and numbers.
Select your own Wi-Fi and login with your password. Align the two-dimensional code displayed on the phone with the camera lens, maintain a distance of 4-8 inches and keep balance. Click “I heard the beep voice” after hearing the beep, a few seconds later, you will hear the voice “Internet connected welcome to use cloud camera”. 3.2.2 Addition by connecting to network cable (Only support Lan port device) Please connect Ethernet cable between camera and Wi-Fi router.
3.2.3 Addition of AP hotspot After your phone connect to a Wi‐Fi , please click “Add device” and “Addition of AP hotspot”,, after hearing the voice “Please configure camera by scanning code or AP hotspot”, please click the “Connect to the network”.if you do not hear the voice,please reset you camera. Follow the wizard make your phone connect to “CLOUDCAM_XXXX” network and Return to YCC365 plus app. Click “Next ” and Select your own Wi-Fi and login with your password.
3.3 AP Direct mode (special) Power up the camera and hear the voice "Please configure camera by scanning code or AP hotspot" (if you don't hear the voice, reset the camera） Open the YCC365 plus app to enter the login interface, click “Local login” .
Make your phone connect to “CLOUDCAM_XXXX” network ” Click “AP networked device preview” and Click “Next” . Scanning the device in the Wi‐Fi network , then click the device . Enter user name: admin password: 12345, click “CONFIRM”, then you can preview the screen.
4 Function introduction Real‐time preview interface A:Parameter Menu C:Full Screen E:pan‐tilt reset G:Pan&Tilt I:Video quality L:Sound K:More B:Snapshot D:Video playback F:Preset H:Message J:Hold to talk Control white light View cloud albums Video to the phone. 4.1 PTZ/ Preset PTZ By sliding steering wheel or sliding the screen on the live preview can control the camera's rotation . Preset 1、Click the preset icon to enter the preset management interface. 2、Add the preset: several presets can be added.
4.1.
4.1.2 Delete the preset 4.2 Video playback Gentle hint : video playback by default is cloud recording , if you want to playback the video on the TF card , you can switch “play videos from” to “SD card”. Cloud video has color discrimination, dark blue indicates the alarm recording and light blue indicates non‐alarm recording. TF card video color uniform light blue. Click the date icon to playback the video of the selected date.
4.3 Video clip Gentle hint: Only the cameras with cloud service package have this feature. Drag the playback cursor and click the clip icon, select start time and click “save to the cloud album ” , enter the video name and click “save”.
4.4 Download cloud video / share cloud video Click the cloud album icon and click the video clip, click “Download” to save the video to your phone or click “Share” to share your Video on Facebook and YouTube.
4.5 cloud video playback Click “Message” to view the alarm video.
5.1 Cloud Storage service We offer 30-day-long cloud service, everyone can enjoy the cloud storage service for free, after that you can choose to pay for the service with a low cost. A、Select “Cloud service” and check Subscription packages B、There are three kinds of subscription packages for you, you can choose to pay for this service by monthly or yearly. C、We support PayPal payment system, click “Go to PayPal now” and then finish the payment ( please install PayPal app in advance ) 5.
5.3 Notification settings Turn on the sound switch,detect abnormal sound triggering message push Turn on the motion switch,detect the motion triggering message push Push notification setting Gentle hint：Only the cameras with cloud service package support mail delivery.
5.4 Other functions settings Device Microphone: Open / Close the microphone Night Vision： 1、Off, close the night vision 2、On, always open night vision 3、Auto, automatic switchover Rotate The Video Feed 180°： Flip the picture when the camera is installed under the roof. Wi-Fi Network: Change the Wi-Fi on the device. Note: The Wi-Fi must be searchable, if the location changed and the Wi-Fi is different, please reset and connect to a new Wi-Fi again. Device Details：Check the ID and the number of the software\h
7 How to use a camera on a computer Log In:www.ucloudcam.com 8、 Frequently asked questions 1、Can’t add the device？ A、Please make sure the camera has been reset. Press the Reset button until hear the prompt tone B、Only support 2.4GHZ Wi-Fi, if your Wi-Fi router is 5GHZ, please switch to 2.4/5GHZ dual mode. C、Please turn on the GPS service before adding the device on the Android mobile phone .
（1）“Please configure camera by scanning code or AP hot spot” （2）Select your Wi-Fi and login with your password, after the device makes a noise like “beep” you will hear this “Please wait for Wi-Fi connecting”. （3）“Please wait for internet connecting” after getting the Internet ip address. （4）“Internet connected welcome to use cloud camera” A、If you can’t go to the second step, please check your Wi-Fi channel is not hidden, and the Wi-Fi router can’t be so far from the camera.
remove the camera in the current device. 12、How can I get my camera connected to the other Wi-Fi. Two ways: A：When you need to change to another Wi-Fi without moving the place. Parameter setting >> Wi-Fi Network >> select the Wi-Fi B: When the camera is moved to another place, please start the camera, you will see the “Device disconnected” on the main page, and then click “TROUBLESHOOT” to connect to the Wi-Fi again.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
