Operation Manual

Operation manual for temperature-measuring face recognition terminal
[Active object threshold]: The default threshold is 5 and the setting
range is 0-10.
[Individual recognition interval]: 1 second by default and the setting
range is 0-255.
[Recognition distance]: Unlimited by default, support "0.5 m", "1 m"
and "2 m" recognition distance selection.
[Stranger recognition]: Disabled by default, support "Turn off", "Voice
prompt"
and "Voice prompt and face capturing" section.
[Safety helmet inspection]: Safety helmet inspection is turned off by
default. The default threshold is 45 and the setting range is 0-99.
[Enable access recognition]: Enabled is checked by default.
Comment: After turning off the option, the system will not open the door
after any recognition method is successfully recognized.
5.3 Temperature measurement setting
On [Recognition setting] interface, click the [More settings] at the right
bottom to enter the [Recognition of advanced setting] interface, that is the
temperature measurement setting interface.
Page 14