Operation Manual

Operation manual for temperature-measuring face recognition terminal
[Enable temperature detection]: After turning on the switch, the
temperature is detected during the face recognition. Temperature
measurement distance is 0.4 m.
[Temperature detection range]: The system provides default values that
can be changed. The system will return to temperature measurement
results normally if it is within the temperature measurement range; the
system may not carry out temperature detection if it is outside the
temperature measurement range.
[Normal temperature upper limit]: The system provides default values
that can be changed. In the normal range, successful face recognition can
access normally; when the temperature exceeds the upper limit, please
contact the staff for confirmation.
Page 15