Operation Manual

Operation manual for temperature-measuring face recognition terminal
[Early-warning of temperature upper limit]: After turning on the
switch, there will be a beep alert when the temperature exceeds the upper
limit.
[No access for temperature early-warning]: After turning on the switch,
access is prohibited when the temperature exceeds the upper limit.
[Voice broadcast of temperature]: Voice broadcast of temperature is
supported after turning on the switch; temperature measurement results
are only displayed on the screen after turning off the switch.
[Stranger temperature detection]: After turning on the switch,
non-whitelisted people not can detect the temperature but the gate will not
be opened; the stranger temperature detection is not supported after
turning off the switch.
[Temperature measurement mode]: Enter the operating mode of
temperature measurement only after turning on the switch, and the faces
on the whitelist will not be compared. As long as the user
’s temperature is
within the normal range, the gate will be opened.
[Enable mask detection]: The users will be detected for mask wearing
after turning on the switch.
[No mask early-warning]: After turning on the switch, there will be a
beep alert if users are not wearing masks.
[No access for non-mask wearers]: After turning on the switch, even if
the face recognition is successful and the body temperature is within the
normal range, users without masks are still not allowed to access.
5.4 Advertisement setting
Click [Advertisement setting] to enter the interface.
Page 16