Operation Manual

Operation manual for temperature-measuring face recognition terminal
normally closed types.
[Relay output status]: Normally open by default, normally closed mode
can be selected.
[Tamper alarm]: Turned off by default, you can check to turn on.
[Wiegand type]: Support Wiegand 26, Wiegand 34, Wiegand 66 formats.
5.6 Fill-in light setting
Click [Fill-in light setting] to enter the interface.
[Infrared lamp brightness]: Drag the progress bar to configure the
brightness value.
[White lamp brightness]: The control mode supports four modes:
Normally closed, normally open, designated time period, intelligent fill-in
light.
 Normally closed: The fill-in light is in normally closed status after
clicking the button.
 Normally open: The fill-in light is in normally open status after
clicking the button.
 Designated time period: After clicking the button, set the time period
for which the fill-in light is automatically enabled. The fill-in light is
enabled during designated time period and the fill-in light is disabled
outside the designated time period.
Page 19