Vivitar Bluetooth Headphones User Manual VU50
Important Safety Precautions When using your Bluetooth Headphones, basic safety precautions should always be followed, including the following: 1.READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES. 2. Do not use your headphones near water. Clean using a dry or slightly moist cloth. 3. Do not place your headphones on any wet surfaces. 4. Do not allow children or the infirm to play with your headphones without adult supervision. 5. Do not expose your headphones to excessive heat, flames or fire. 6.
Introduction Thank you for purchasing your Bluetooth Headphones, item VF50012BT. You can use your headphones with iPads, iPhones, iPods and many other types of smartphones and Bluetooth devices to stream music and enjoy hands-free calling. In addition, once powered on, your headphones light up in an exciting array of colors and patterns. In order to get the best results when using your headphones, please read this manual prior to using.
A Quick Look at Your Device
Charging Your Headphones Your headphones have a built-in, rechargeable lithium ion battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is only achieved after a few charging-discharging cycles. Charge the battery fully before first use. To do so, follow the steps below: 1. Connect one end of the included USB charging cable to the charging port on your headphones.
Pairing Your Headphones with a Bluetooth Device Your headphones can be paired with most Bluetooth devices including iPads, iPhones, iPod Touches, and most smartphones, laptops and tablets. In order to pair your headphones with a phone, follow the steps below: 1. Press and hold the ON/OFF button in order to power on your headphones. The LED indicator light will start alternately flashing red and then blue repeatedly. This indicates that your headphones are in pairing mode. 2.
Using Your Headphones Powering Your Headphones On and OFF 1.Press and hold the ON/OFF button in order to power on your headphones.If you have alreadypaired your headphones to your Bluetooth device, they will automatically remain paired eachtime you power on your headphones. 2. Press and hold the ON/OFF button in order to power off your headphones. Listening to Music • Play/Pause Button: Press to play or pause a track.
Maintenance and Care -Before using your headphones, examine the ear cups to make sure that they are clean. Similarly, inspect the ports and jacks of your headphones to make sure that they are clear of dust and debris before charging or inserting an AUX cable. -Use a soft, moist cloth to clean the cushions of your ear cups. Do not allow moisture to get inside the ear cups. If necessary, use a small amount of dish soap diluted with water to clean more stubborn stains.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Vivitar One Year Warranty This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
Vivitar One Year Warranty (continued) NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.