Specifications

8
3. Contact us
For module Purchasing or Technology consult, Contact us with in
business hours,we will serve for you with all sincerity!
Business hours: Monday to Friday, 9:00-18:00
Phone:[phone]
Address:905 2Building 67th Area Zhongliangchuangzhi
Factory,XinanStreet,BaoanDistrict, Shenzhen. China
INTEGRATION INSTRUCTIONS:
FCC rules
The SY1-NBZ-50S is a Bluetooth Low Energy (BLE) 5.0 Data Pass-through Module with frequency hopping using
an LoRa modulation. It operates on the 2402MHz-2480MHz band and, therefore, is within U.S. FCC part 15.247
standard.
Modular installation instruction
Please pay attention to the installation direction (pin direction). If you have any questions, please contact us
directly.
Trace antenna designs
Not Applicable
RF exposure considerations
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with
minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Antennas
SY1-NBZ-50S is an Bluetooth Low Energy (BLE) 5.0 Data Pass-through Module beams signals and communicates
with its antenna, which is PCB Antenna.The Antenna gain is 0dBi
LABEL OF THE END PRODUCT
The final end product must be labeled in a visible area with the following " Contains FCC ID: 2ALOVSY1-NBZ-50S.
If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be
available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Information on test modes and additional testing requirements
Data transfer module demo board can control the EUT work in RF test mode at specified test channel.