User's Manual

星空投影灯激光灯版全英文说明书 70*90mm
STARRY PROJECTION LAMP
Product Manual
Parts List
Instructions For Use
Remote Control Function Panel
Need to install two AAA batteries to use
Remote Control Function Description
Host Key Function Description
Main view
Left view
Top view
Product Parameter
Starry Projection Lamp User Manual
Thank you for purchasing our company's product.
This product is a smart starry projector. We hope
to bring you a romantic and warm product experience
during use; please read this manual carefully before
using this product and keep it in a safe place for
future reference .
①Switch button: Press the power on, and the motor will rotate at
a high speed for 1.5s after turning on. The RGBW light is blue by
default, the two special effect lights are turned on, the sky star is
breathing, and the film projection light is always on.
②Special effect light button: single click to turn on two special
effect lights (the default state is turned on when the power is
turned on), and the sky full of stars is in the breathing light mode
after the special effect lights are turned on. The film projection
lamp is always on, click the special effect light again to turn on only
the stars, click again to turn on only the film projection light, press
again to turn off the two special effect lights, press again and turn
on at the same time, the operation is repeated.
③RGBW light button: click to adjust the light combination, the
light color sequence is blue, red, green, white, blue red, blue white,
blue green, red green, red white, green white, blue red green, blue
green white, blue Red-white, blue-red-green-white, color gradient.
When the 15 light colors are adjusted, turn off the light one last
time, press again to return to the first light color, and long press to
adjust the brightness of the light. There are a total of 12 brightness.
When you press and hold the light to adjust the brightness, each
brightness pauses for 1s.
④Music button: Click to turn on the built-in music (the power-on
state is off), press again to switch to the next song, press again to
switch to the next song, a total of three music, after switching to
the last song, switch again to turn off the music , Long press to
adjust the volume. The volume changes from small to large, and
BT connection:
Turn on the BT automatically, search for BT egogo-5
on the mobile phone, and click egogo-5 to match. At this time, the
host has a beep to indicate that the BT is connected and the operation
is complete. When the connection is disconnected, the host also has a
beep to indicate that the BT has been disconnected. Note: When
playing the built-in music, BT cannot be connected. Turn off the
built-in music before you can enter the BT mode and connect to
the BT.
BT restart: long press the special effect light button for 5S, BT
restarts. After restarting, you can pair the device again.
Reminders: 1. Use at night or in a dark environment, the lighting effect is better;
2. Please connect to USB before using the product.
Starry Projection Lamp
Name
K-1080
7W
ABS+PC
132*132*138mm
Model
Rated Power
size
material
Rated voltage
5V 2A
①ON/OFF: Press once to open, then press to close, the operation
is repeated;
②Music rhythm button: When playing music, press the button
to turn on the music rhythm function, and press it again to turn
off the rhythm function;
③Timing button: Set the timing shutdown function of the product,
you can set half an hour, one hour, and one and a half hours, you
can also turn off the timing; press the timing button, the host will
emit a sound;
④Music control area: adjust the volume of the music and switch
the upper and lower music;
⑤BT music switch button: press it once to turn on the built-in
music, and press it again, the built-in music is turned off, and the
BT mode is turned on. At this time, you can use your mobile
phone to connect to BT and play mobile music.
⑥Special effect light button: Press L+G to turn on the two
special effect lights; press L to turn on only the film projection
special effect lights, and press G to turn on only the sky-filled
special effect lights;
⑦Rotation gear button: Rotate the button to adjust the motor
rotation gear and turn off, press once to open, then press to close,
the operation is repeated; before each gear is turned on, it will
quickly rotate for 1.5S.
⑧RGBW light switch key: Press once to adjust the RGBW light
combination, the order of light color is blue, red, green, white, blue
red, blue white, blue green, red green, red white, green white, blue
red green, blue green white , Blue red white, blue red green white,
press again to turn off the RGBW light, press again to turn on the
blue light again, Repeated operation.
⑨RGBW light dimming key: dim RGBW light.
VOL+
VOL-
Music
rhythm
1H
1.5H
0.5H
1 2 3
Fade
L+G
L G
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
then stops at the maximum. To decrease the volume, you need to
press and hold the music button again. When playing a BT
song, click the music switch and the light will move with the music.
⑤ Rotation button: Click the rotation speed to switch to the
second gear (the default is the first gear); press it again to switch
to the third gear; press it again to turn off the rotation, press it
again to switch to the first gear, and the operation is repeated.
(Each time the gear is switched, the motor will first rotate at high
speed for 1.5s, and then enter the corresponding gear)
⑥Film accessories: toggle to switch the projection pattern, one
slice of three patterns can be switched.
⑦Automatic timing function: In order to better use the product,
the product will automatically shut down after working for 4 hours
after it is turned on. If there is a timing operation during use, the
product will switch to timing shutdown.
⑩RGBW light brightening key: brighten RGBW light.
RGBW gradient button (Fade): Click once to turn on the RGBW
light gradient mode, the color will automatically switch, and press
again to close the RGBW light gradient mode;
Precautions
1. Please ensure that the product avoids contact with water and
corrosive liquids;
2. If you need to clean the product, please make sure to
disconnect the power supply;
3. For better and smoother use, please use a 5V/2A adapter.
①
②
③
④
⑤
Special effect lights (Gypsophila)
Special effect lamp
(film projection lamp)
⑥Film accessories
RGBW light
USB Power Cord
Host
Product Manual
Slideshow
Supporting feet
Remote Control
1
1
1
1
3
3
Product assembly instructions
1. Take out the main unit
and 3 supporting feet from
the package.
3. After inserting, rotate the
support foot clockwise until the
bump on the support foot is
aligned with another point.
4. Assemble the remaining two
supporting feet in the same
way, and the assembly is complete.
2. Take a supporting foot and align the
convex point on the supporting foot with
the assembly hole at the bottom of the
host. Note that the convex point should
be aligned with the point on the left of
the arrow, and then insert it into the hole.