User's Manual
Thank you for choosing Vitat Smart body weight scale. This scale is your personal health assistant that could
track and record your weight.We sincerely hope that you enjoy our Vitat scale.
Safety Cautions
1. This scale is not intended for commercial use.
2. This scale should not be used to diagnose or treat any medical condition. Consult your primary care
physician before making changes to your diet, exercise plans, or physical activities.
3. If you are pregnant, have a pacemaker, or other internal device, you should not heavily rely on the data
provided by this product. Please note that all data should be used as a reference and is not substitute for
medical advice from a licensed healthcare professional.
4. Check the scale before use. Do not use the scale if it is damaged in any way.
5. The glass platform is slippery when wet. Make sure the platform and your feet are dry before stepping on for
measurement.
Use and Care
1. To weigh safely and accurately, stand with your feet shoulder-width apart while on the scale.
2. DO NOT strike or drop the scale.
3. DO NOT stand on the edge of the scale or jump on it.
4. DO NOT stand on the scale platform for a prolonged period of time or when not in operation.
5. DO NOT store or operate near heat sources or in humid environments.
6. Handle the scale with care, as it is a precision instrument.
7. Clean the scale with a clean and dry cloth. Avoid getting water or any other liquid inside the scale.
8. DO NOT use chemical or abrasive cleaning agents to clean the scale
9. Keep the scale in a cool and dry environment.
10. Always keep the scale in a horizontal position, do not store vertically.
11. If the scale fails to turn on, check whether the batteries are installed correctly. Replace the batteries if
necessary.
12. If an error appears on the display or if the scale does not turn off automatically, remove the batteries for
over 30 seconds, then reinstall them.
13. DO NOT overload the scale (maximum weight capacity:182kg/400lb/28st).
14. DO NOT mix new and used batteries or different battery brands to power the scale.
01
Vitat Smart Body Weight Scale
Product Introduction
1. Remove the isolator tab from the battery compartment.
2. For best accuracy, place the scale on a hard and at oor. Carpeted or uneven oors can negatively effect
the accuracy .
3. The scale operates with step-on technology but needs to be calibrated automatically under following
occasions.
A. when rst time use, moving the scale or battery exchange, the scale will display scale itself weight, and
appear “CAL” after around 1second, and then display “0.0” or “0.00” after around 2seconds , now it’s ready
to step on to weigh normally.
Weighing without Vitat App
Operation
Scale Foot
Battery Cover
Unit Switch
LED Display
Tempered glass
English