Installation Tips

EQUIPMENT OPERATION
WORKING STATE
EQUIPMENT INSTALLATION
DIAGRAM
WARM PROMPT
NAME AND CONTENT OF
HARMFUL SUBSTANCE
P4
P6 P7
1.BOOT
Plug in the power cord
and turn on the device.
2.REGISTER LOGIN
First use
Click Register, follow the prompts to
complete the registration and login.
3.ADD EQUIPMENT
Click Add Device and add device as
prompted Note: “This device is only
supported on 2.4GB Wi-Fi networks.”
4.BEGIN TO USE
Click the device added
successfully to start using
3.DOWNLOAD AND INSTALL THE APP
Scan QR code download the APP and complete the installation.
P5
Network connection failed Red On off Blinking for 0.5 seconds
Scan the QR code red and blue on 2S off 1s
The network is being connected Red and blue on and off 0.5 S
Network disconnection, red and blue alternating for 0.5 S
Pairing successful, long blue light
Other errors are displayed in red for a long time
2
1
SMALL NIGHT LIGHT
INDICATOR LIGHT
P10P9
In order to meet the relevant provisions and requirements of "Measures for the Management
of The Restricted Use of Hazardous Substances in Electrical and Electronic Products", this
product Hazardous and toxic substances, classified by component, are declared as follows:
Description table of harmful substance content state of the product
The harmful substances contained in this product are caused by the current technical limitations and no alternative substances can be found.
And within the scope of the EU RoHS exemption, special consideration has been given to the design of the product.
Ensure that exterior components are made of non-toxic and environmentally friendly materials,
Consumers do not come into contact with hazardous substances under normal use.
No harm to baby.
PART NAME
THE WHOLE MACHINE
CABLES AND CABLE SETS
CABLES AND CABLE SETS
Note: All parts marked with "x" in the table are in line with the exemption clauses required by EU RoHS regulations.
There are no alternative technologies or components available at this stage.
The number in the logo represents the environmental protection limit of the product under normal use.
TOXIC OR HARMFUL SUBSTANCE OR ELEMENT
:Indicates that the content of the toxic and harmful substance in all the homogeneous materials of the component
exceeds that specified in international standard Limited requirements
LEAD
Pb
PUMP
Hg
CADMIUM
Cd
HEXAVALENT
CHROMIUM
Cr6+
POLYBROMINATED
BIPHENYL
PBB
POLYBROMINATED
DIPHENYL ETHERS
PBDE
:Indicates that the content of the toxic and harmful substance in all homogeneous materials of the component
does not exceed international standard Limit requirements
１０
Please place the product out of reach of children to avoid the occurrence of danger
caused by children eating parts by mistake;
Do not use a non-original power adapter because it may cause fire, explosion, or
other hazards.
Please avoid placing the product or accessories in damp places, so as not to affect
the normal use of the product;
For the safety of you and your family, please ensure that the products you purchase
are not bound or authorized by unauthorized persons. AiDoohiky will take strict
measures to protect the security of your information and your family.
P8
Place the device directly above the crib
It can make the equipment take a clearer picture
Get a wider view of your baby's every move
It is convenient to soothe the baby's emotion
through the device when the baby cries
It is not recommended to put the equipment
in places frequented by children .Prevent the
equipment from causing harm to the baby
Strongly recommended:In order to give full play to
the optimal recognition effect of the equipment De
vice AI function, you are strongly recommended to
choose the appropriate installationThe bracket ins
talls the device directly above the baby bed; And
About 60CM-70CM away from the baby
REGISTERED ACCOUNT
TO THE REGISTRATION
ADD EQUIPMENT
CLICK ADD DEVICE
CLICK ON THE DEVICE TO START USING IT.
Current bound number:Four people
BABY SLEEP MONITORING
POWER SOCKET